Best Castor Seeds Oil Extractor in Algeria
- Use: Castor Oil
- Type:Castor Oil Extractor Machine
- Production Capacity: 280kg/H
- Power: 30Kw-6P: 4500
- Dimension(L*W*H): 20M*30M*9M
- Weight: 35ton
- After-Sale Service: Installation, Commissioning and Training
- Market: Algeria
EXTRACTION AND CHARACTERIZATION OF CASTOR SEED OIL
Castor oil was extracted by mechanical cold pressing (< 45 0 C) of the seeds of wild castor plant (Ricinus communis L.) found in wet marginal lands of Katsina, Nigeria. Oil yield was 39.43%. The
Castor oil is pale amber viscous liquid derived from the seeds of the plant Ricinus Communis, sometimes known as ricinus oil [1]. Castor oil is one of the few naturally occurring glycerides that approach being a pure compound, since the fatty acid portion is nearly nine-tenths ricinoleic.
Bioactive Phytochemicals from Castor (Ricinus communis Linneo) Seed Oil
Castor seed oil processing by-products are suitable raw materials for biogas and bioethanol production . Bio-oil from castor seed cake was produced through a slow pyrolysis process, resulting in a comparable calorific value (37.5 MJ kg −1) to petroleum fuels (43–46 MJ kg −1) .
In this study, the extraction of oil from seeds of castor (Ricinus communis) was intended using aqueous enzymatic extraction (AEE).After evaluating several enzymes (cellulase, pectinase, hemicellulase and Viscozyme L), the enzymatic cocktail Viscozyme L gave the best oil extraction yield (64 %) at pH 4 and 50 °C, and it was chosen for the optimization of the extraction process using a
Enhancing bio-oil yield extracted from Egyptian castor seeds ..., Nature
The screw press was used in oil extraction as studies have proven its success and efficient in extraction. Castor seeds were pressed at temperatures of 50 to 100 °C and speed of 40, 80 and 120
Sourcing good quality castor beans → Clean the castor beans → Place beans in the cold press oil extractor → Cold pressing → Filter and store the cold-pressed castor oil. Start by choosing fresh, good quality castor beans. Make sure they don't have a lot of impurities or contaminants. Thoroughly clean and dry the castor beans to remove
Optimization of castor seed oil extraction process using response
This work is focused in the study of the oil yield extraction from castor seed using three different seed states called: whole, broken and bare endosperm. Taguchi design was used to determine the
Castor oil extraction is performed using mainly two techniques: the crushing of seeds (hydraulic press or expeller-based techniques) and solvent extraction. The most commonly used solvent for the solvent extraction technique is hexane; however, hexane (non-polar solvent) is not an effective extractor due to the difference in polarity with some oils that have polar nature, such as castor oil.
Comparative Extraction of Castor seed Oil Using Polar and Non polar
Extraction of oil from castor seeds was carried out by Soxhlet apparatus using hexane at 1:3, 1:6, 1:9 solid to solvent ratios and different extraction time periods of 8, 10, 12 and 14h. The highest oil yields of 43.9, 42.8 and 45.8% were
The effect of extraction parameters covering a temperature range of 180-240°C, using seeds with mean particle size ranging from 12 mm to less than 0.5 mm, water to seed ratios of 0.5:1, 1:1, 2:1
