2-1000Ton Top Ten Sunflower Seeds Oil Extruder in Nigeria
- Use: Sunflower Oil
- Type:Sunflower Oil Extruder Machine
- Production Capacity: 120-150kg/h
- Power: 2.2-15
- Dimension(L*W*H): 1200 *1200 *1680 mm
- Specification: 535*240*300mm
- After Warranty Service: 12 months
- Market: Nigeria
1000ton top ten sunflower seeds oil extruder
Twin-screw extruder for oil processing of sunflower seeds: Thermo-mechanical pressing and solvent extraction in a single step. Production Capacity: 80-800kg/h-99%; Voltage: 380V; Dimension(L*W*H): 2700*2000*2700 mm; Weight: 1980 KG; Core Components: Motor, Pump, Gear, Bearing, Engine, Gearbox, Squeezer
The fatty acid methyl esters extraction of sunflower oil using a CLEXTRAL BC 45 co-rotating twin-screw extruder increased oil extraction yield up to 96% and decreased residual oil content in cake meal below 5% under solvent-to-solid ratio of 0.70 (Amalia Kartika et al., 2003).
Sunflower farming in Nigeria, FarmingFarmersFarms
Experts have projected that since Nigeria has the highest potential of sunflower production in Africa, among the over 15 countries like Tanzania, Ghana, Uganda, Kenya, Egypt, Ethiopia, Morocco, Zambia, Mozambique, Zimbabwe, Angola, South Africa, Rwanda and Sudan, the country can earn about US$1.5billion from the export of its seeds and another
A new application of twin-screw extruder as a machine to conduct a thermo-mechanical pressing and a solvent extraction of sunflower oil in a single step and in a continuous mode was studied. Experiments were conducted using a CLEXTRAL BC 45 co-rotating twin-screw extruder and whole sunflower seeds with fatty acid methyl esters as a solvent.
Extraction of sunflower oil by twin screw extruder: Screw
The oil content of seed used in the first set of tests (screw configuration study), expressed in relation to the wet matter content of uncleaned seed, was 39.46% (NF V03-908). The seed moisture content at storage was 7.13% (NF V03-903). The sunflower seeds were of the oleic type. In the second set of tests (operating conditions study), the
According to Alhaji Jibrin K. Bukar, the Sunflower Growers, Processors and Marketers Association of Nigeria (SUNGPMAN), the nation's output for 2019 was 57,000 metric tonnes. Value chain. Majorly
A Twin-Screw Extruder for Oil Extraction: I. Direct
A new process, in which sunflower seeds are pressed in a twin-screw extruder, is examined here. The screw profile was first optimized. Oleic sunflower seeds were crushed and 80% of the oil was
DOI: 10.1016/J.INDCROP.2010.05.005 Corpus ID: 98652016; Twin-screw extruder for oil processing of sunflower seeds: Thermo-mechanical pressing and solvent extraction in a single step
A twin‐screw extruder for oil extraction: I. Direct
A new process, in which sunflower seeds are pressed in a twin-screw extruder, is examined here. The screw profile was first optimized. Oleic sunflower seeds were crushed and 80% of the oil was removed. The resultant oil was of good quality, with acid numbers below 2 mg KOH/g of oil and total phosphorus contents of about 100 ppm.
The following operating conditions were tested: the barrel temperature (80 – 120C), the screw rotation speed (75–260 rpm) and the seed input flow rate (19 – 48 kg/h). All trials were conducted using profile 2 and conventional type sunflower seeds (average oil content of 45.31% and 6.56% moisture content). Analysis.
